Logo
发货到: CN

登录帐户
订单状态

Reverse Components Angle Spacer DH(速降) 1 1/8"

免费送货到 CN运费.
数量
添加到购物车
仅在线和单击并收集
目前可通过本店购买。
商品编号
生产商货号
商品型号表
显示制造商物品编号
Reverse Components Angle Spacer DH(速降) 1 1/8" 37340834 15.04€
制造商物品编号 01231
请选择一项。

Fine tuning for your DH fork

With the DH Angle-Spacer (fork cone) for 1.5 "head tubes reduced to 1 1/8" fork shafts of double crown forks, the geometry of the bike can be fine-tuned.

It is possible to make the steering angle half a degree (- 0.5 °) flatter, which means that even more performance can be brought out of the bike on steep and difficult descents! The spacer replaces the conventional fork cone and is mounted between the fork crown and the headset. The Angle-Spacer can be used with any headset with 45 ° ball bearings. (45 ° ball bearings are installed in 95% of all bikes). The DH Angle Spacer is wider than the standard 1 1/8 Spacer (Ø 62mm) and therefore adapts perfectly to wide 1.5 "head tubes.

Assembly instruction

To use the Angle Spacer, simply take the fork out of the frame and then remove the existing fork cone / Crown Race from the fork crown. The Angle-Spacer is installed directly above the fork crown at the point where the old fork cone / Crown Race was previously. The use of the Angle-Spacer does not change the stability and stiffness of the fork in any way. It can be mounted on any bike without hesitation. This gives you a more modern geometry with more driving fun and safety.

Highlights

  • Material: aluminum
  • Inner diameter: 1 1/8 ``
  • Outside diameter: 61.0mm
  • Construction height: 10 mm
  • Weight approx. 61 g (+/- 5% weight tolerance)

scope of delivery

  • 1 x Reverse Angle Spacer (see item description for details)
项目组信息 目前仅有 汉语 版本
Price alarm!
发现一个错别字?
适用法定保修权利。
AJAX Loader Icon