Rohloff CC PM set with Direkt PostMount disc brake mount
The PM Bone allows mounting of a Rohloff SPEEDHUB on frames (135mm, 142mm, 170mm, 177mm) with Direkt PostMount brake mount (for 160mm or 180mm brake discs). In order to be able to derive the support torque from the hub via the PM Bone into the frame, a PM axle plate must be used. The PM Bone is mounted between the frame and the brake caliper and thus acts like an adapter, which requires the use of the next larger brake disc.
Important mounting condition
The Rohloff PM axle plate must lie flat in the area of the axle and must not collide with other frame parts (weld seam). Only then is interference-free installation possible with PM axle plate and PM Bone. An assembly with PM Bone can be used on frames with brake seats on the seat stay or the chain stay (in the frame triangle).
DANGER For dropouts that are open at the bottom, the support point of the PM axle plate on the PM Bone must be in front of the imaginary line through the axle slot to prevent the axle from being pulled out of the dropout (risk of accident).
For mounting to frame with 10mm slot and PM direct brake mount
When using a quick release axle, the Rohloff CC PM Center Plate must be used
1x Rohloff PM Bone Adapter Speedhub 500/14 CC
1x Rohloff CC PM axle plate Speedhub 500/14 CC
2x brakes fixing screws
Über die Marke Rohloff
Currently we can offer the item group info only in 德语:
Fehler bei Server-Aufruf (AJAX fehlgeschlagen).