生产商货号
A bicycle saddle from the 3D printer
The first high-end 3D printed saddle from Selle Italia. Its intricately patented printed mesh on the Ti 316 frame is harder or softer depending on the location to give the rider clean and fluid support. Selle Italia made a conscious decision to bring this technology onto the market with an SLR boost shape. Because if you can get along with the SLR Boost, you can switch to the 3D version immediately.
highlights
- Innovative upper
- Unlimited support for the driver
- Based on the Selle Italia SLR Boost
specification
specification | S3 | L3 |
---|---|---|
area of application | racing bike | racing bike |
upper | 3D printed | 3D printed |
seat rails | Ti316, 7x7mm | Ti316, 7x7mm |
Dimensions | 130x248mm | 145x248mm |
Max rider weight | 100kg | 100kg |
Technologies used
In this chapter we explain the technologies that the manufacturer uses in this product.
IDmatch
The S1 and L1 models do not have a central cut-out and are suitable for cyclists with low pelvic rotation, for whom it is not essential to reduce the pressure and friction exerted on the saddle.
The S2 or L2 saddles are designed with a smaller central cutout and are suitable for cyclists with a moderate pelvic rotation who build up pressure and friction while pedaling: elements that together also lead to an increase in temperature at the point of support, causing physical problems and discomfort.
The third size - S3 or L3 - concerns saddles with a large central cut-out and is intended for cyclists with a large pelvic rotation who build up a lot of pressure and friction on the saddle surface.
scope of delivery
- 1 x Selle Italia SLR Boost 3D Superflow (see item description for details)