Logo
发货到: CN

登录帐户
订单状态

Maxxis Assegai 29" 3C MaxxGrip

测试成功
免费送货到 CN运费.
数量
添加到购物车
仅在线和单击并收集
目前可通过本店购买。
商品编号
生产商货号
商品型号表
显示制造商物品编号
折叠轮胎 WT DH(速降) TR 63-622 (29x2.50) black 44932150 45.21€
制造商物品编号 1317
???? WT EXO+ TR 63-622 (29x2.50) black 44935602 44.29€
制造商物品编号 1121
请选择一项。

Experience and knowledge

After more than two years of development, the Maxxis ASSEGAI is finally here! Greg Minnaar's signature tire is the essence of his 30 years of racing experience and Maxxis' expert knowledge from over 50 years of tire production.

“My idea was to design a tire from the best Maxxis profiles. I started in the middle with a combination of Minion DHF and Minion DHR II. The reason for this was that the surface of the DHF rolls well and holds onto hardpack, in greasy curves and on wet roots and stones. The DHR II rolls much better and can brake more aggressively.

Then I set out on an 'extra' stud that gives you more support and a constant feeling when you put the bike on the outer studs in the curve. This brings us to my favorite tire - the HighRoller. The Maxxis engineers and I reshaped the HighRoller side lugs so that it had pretty much the same properties as the original. But with the support of this extra stud you have the ultimate wingman when you rush hard into flat curves. In the end, I took over the tunnel height from the Shorty. The tunnels are well supported, so the raised profile can bite well into forest soil and dry, dusty soils.

Greg Minnaar

2.60WT wide tires generally have a WT construction, but no WT marking on the tire sidewall. "

 
 

Technical specification

specification 1117 1121 1317
Area of application Enduro Enduro Enduro
Type Folding tire Folding tire Folding tire
ETRTO size 63-622 63-622 63-622
Size inch 29x2.50 29x2.50 29x2.50
execution WT WT WT
Compound / rubber mixture 3C MaxxGrip 3C MaxxGrip 3C MaxxGrip
version DD EXO +  
Tubeless ready Yes Yes Yes
E-bike approval Yes, E-25 Yes, E-25 Yes, E-25
TPI / EPI 120 120 60
colour black black black
Weight approx. 1305g approx. 1140g approx. 1340g

Technologies used

In this chapter we explain the technologies that the manufacturer uses for this product.

3C MaxxGrip
The well-known 3C downhill mix that many of the best downhillers have trusted for years is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and the best cushioning properties for incomparable traction on downhills.

EXO + Protection
The new EXO + construction combines two of the best puncture protection materials: SilkShield and EXO.

The SilkShield layer surrounds the entire tire from bead to bead, the EXO layer is mounted on the sidewalls. Together, the EXO + results in the following advantages:

27% better puncture protection on the tread *

51% more stable side wall *

28% more puncture protection *

* compared to the proven stable EXO carcass

Tires with EXO + Protection are built for aggressive trail riding and enduro races, and especially designed for the higher torque and weight of E-MTBs. First there are wide versions of the popular Minion DHF, Minion DHr II and Rekon with EXO + casings.

Double down
Doubledown tires are constructed like downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. Thanks to two 120 TPI (instead of 60TPI) carcass layers and aramid bead, they are significantly lighter than the downhill tires, much more stable and robust than the TR + EXO tires and therefore ideal for tough enduro courses.

Tubeless Ready (TR)
Tubeless tires have many advantages: You can drive with less air pressure. This gives you better traction and reduces rolling resistance. And where there is no hose, the risk of a breakdown also decreases. MAXXIS TR tires are better prepared for assembly with sealing milk than other "tubeless ready" tires. Like a real UST tubeless tire, the bead of the TR tire is completely covered with a rubber layer. As a result, tubing-free assembly is successful on all rims with standard dimensions when they are inflated for the first time and with little liquid. “Normal” MAXXIS MTB tires can also be fitted with tubeless sealant like tires from other manufacturers, as the carcass fabric is very dense. Only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.

Wide trail casing
The Wide Trail (WT) construction optimizes the tread layout and tire shape on today's modern wider rims. Traditional tires are developed for narrow rims and are too angular in shape on wide rims and thus not exactly optimal performance. WT tires are optimized for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension between 30 and 39 mm.

scope of delivery

  • 1 x Maxxis Assegai 29 "folding tire (see item description for details)
 

test verdict

Test result: "Very good" in Fahrrad 03/2023 (p. 58)

Test verdict

World of Mountainbike Best of 2021

Experience and knowledge

After more than two years of development, the Maxxis ASSEGAI is finally here! Greg Minnaar's signature tire is the essence of his 30 years of racing experience and Maxxis' expert knowledge from over 50 years of tire production.

“My idea was to design a tire from the best Maxxis profiles. I started in the middle with a combination of Minion DHF and Minion DHR II. The reason for this was that the surface of the DHF rolls well and holds onto hardpack, in greasy curves and on wet roots and stones. The DHR II rolls much better and can brake more aggressively.

Then I set out on an 'extra' stud that gives you more support and a constant feeling when you put the bike on the outer studs in the curve. This brings us to my favorite tire - the HighRoller. The Maxxis engineers and I reshaped the HighRoller side lugs so that it had pretty much the same properties as the original. But with the support of this extra stud you have the ultimate wingman when you rush hard into flat curves. In the end, I took over the tunnel height from the Shorty. The tunnels are well supported, so the raised profile can bite well into forest soil and dry, dusty soils.

Greg Minnaar

2.60WT wide tires generally have a WT construction, but no WT marking on the tire sidewall. "

 
 

Technical specification

specification 1117 1121 1317
Area of application Enduro Enduro Enduro
Type Folding tire Folding tire Folding tire
ETRTO size 63-622 63-622 63-622
Size inch 29x2.50 29x2.50 29x2.50
execution WT WT WT
Compound / rubber mixture 3C MaxxGrip 3C MaxxGrip 3C MaxxGrip
version DD EXO +  
Tubeless ready Yes Yes Yes
E-bike approval Yes, E-25 Yes, E-25 Yes, E-25
TPI / EPI 120 120 60
colour black black black
Weight approx. 1305g approx. 1140g approx. 1340g

Technologies used

In this chapter we explain the technologies that the manufacturer uses for this product.

3C MaxxGrip
The well-known 3C downhill mix that many of the best downhillers have trusted for years is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and the best cushioning properties for incomparable traction on downhills.

EXO + Protection
The new EXO + construction combines two of the best puncture protection materials: SilkShield and EXO.

The SilkShield layer surrounds the entire tire from bead to bead, the EXO layer is mounted on the sidewalls. Together, the EXO + results in the following advantages:

27% better puncture protection on the tread *

51% more stable side wall *

28% more puncture protection *

* compared to the proven stable EXO carcass

Tires with EXO + Protection are built for aggressive trail riding and enduro races, and especially designed for the higher torque and weight of E-MTBs. First there are wide versions of the popular Minion DHF, Minion DHr II and Rekon with EXO + casings.

Double down
Doubledown tires are constructed like downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. Thanks to two 120 TPI (instead of 60TPI) carcass layers and aramid bead, they are significantly lighter than the downhill tires, much more stable and robust than the TR + EXO tires and therefore ideal for tough enduro courses.

Tubeless Ready (TR)
Tubeless tires have many advantages: You can drive with less air pressure. This gives you better traction and reduces rolling resistance. And where there is no hose, the risk of a breakdown also decreases. MAXXIS TR tires are better prepared for assembly with sealing milk than other "tubeless ready" tires. Like a real UST tubeless tire, the bead of the TR tire is completely covered with a rubber layer. As a result, tubing-free assembly is successful on all rims with standard dimensions when they are inflated for the first time and with little liquid. “Normal” MAXXIS MTB tires can also be fitted with tubeless sealant like tires from other manufacturers, as the carcass fabric is very dense. Only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.

Wide trail casing
The Wide Trail (WT) construction optimizes the tread layout and tire shape on today's modern wider rims. Traditional tires are developed for narrow rims and are too angular in shape on wide rims and thus not exactly optimal performance. WT tires are optimized for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension between 30 and 39 mm.

scope of delivery

  • 1 x Maxxis Assegai 29 "folding tire (see item description for details)
 

Test verdict

World of Mountainbike Best of 2021
Maxxis Assegai 29" 折叠轮胎 3C MaxxGrip WT DH(速降) TR 63-622 (29x2.50) black
Maxxis Assegai 29" ???? 3C MaxxGrip WT EXO+ TR 63-622 (29x2.50) black
Manufacturer Info 目前仅有 汉语 版本

Über die Marke Maxxis

Price alarm!
发现一个错别字?
适用法定保修权利。
AJAX Loader Icon