Cyclus Tools 平面铣刀 适用于 前叉锥环 1 1/8", 30,0mm 铣刀 有基座

Max. Milling width: 6 mm

The tool is used for optimum adaptation of the lower fork seat on the fork neck. In order to avoid over-utilization must be exercised by means of the threaded sleeve and the spring a uniform pressure on the cutter. The tool may only be turned in the cutting direction (clockwise)! Use a cutting oil suitable for the material to be processed.

Note: Remove any existing chrome layers before milling to avoid excessive wear of the blades or "scuffing" of the tool in the head tube.